The HiTHIUM HeroEE MaxPower 8 AIO is an advanced all-in-one energy storage system designed for reliable residential and commercial backup power. Combining a Grade-A LiFePO4 battery, 5,000W pure sine wave inverter, built-in MPPT solar charge controller, and smart battery management system (BMS) in one integrated unit, it provides a practical solution for solar energy storage and backup power.
With 8.038kWh of battery capacity, 5kW continuous AC output, and up to 9kW solar PV input, the HeroEE MaxPower 8 AIO is suitable for homes, offices, businesses, and other applications requiring dependable energy storage.
Key Features
- 8.038kWh Energy Storage Capacity – Stores a substantial amount of energy for backup and solar applications.
- 5,000W Pure Sine Wave Output – Provides clean AC power for compatible household, office, and electronic equipment.
- Up to 9,000W Solar Input – Supports high PV input through its integrated MPPT system for efficient solar charging.
- Grade-A LiFePO4 Battery – Uses 314Ah LFP cell technology designed for long service life and stable energy storage.
- 11,000+ Cycle Life – High stated cycle life for long-term energy-storage applications.
- <10ms UPS Switching – Enables rapid transition to backup power for compatible computers, networking equipment, and sensitive electronics.
- All-in-One Design – Integrates battery, inverter, MPPT controller, and BMS into a single system.
- 180% DC/AC Ratio – Allows substantial solar PV oversizing relative to the inverter's AC output.
- Expandable up to 128kWh – Up to 16 units can be connected in parallel based on the supplied specification.
- Residential & Commercial Applications – Suitable for homes, offices, small businesses, solar installations, and backup-power applications.
8.038kWh LiFePO4 Battery Storage
The HeroEE MaxPower 8 AIO features a 25.6V, 314Ah Grade-A LiFePO4 battery system with a total nominal capacity of 8,038.4Wh (8.038kWh).
LiFePO4 (lithium iron phosphate) battery technology is widely used for energy-storage applications because of its combination of long cycle life, stable performance, and suitability for stationary energy storage.
The stated 11,000+ cycle life makes this system suitable for customers looking for a long-term battery storage solution for homes and businesses.
5kW Pure Sine Wave Inverter
The integrated 5,000W pure sine wave inverter provides continuous AC output for compatible electrical loads.
The 5kW output makes the system suitable for a wide range of household and commercial applications, including:
- Refrigerators
- Televisions
- Lighting
- Wi-Fi routers
- Computers
- Office equipment
- Water pumps
- Air-conditioning systems
- Other appropriately sized electrical appliances
Actual appliance compatibility depends on the appliance's rated power, starting/surge requirements, total connected load, and system configuration. A 5kW inverter does not mean every appliance can operate simultaneously.
Up to 9kW Solar Input with Built-In MPPT
One of the major advantages of the HiTHIUM HeroEE MaxPower 8 AIO is its support for up to 9,000W of solar PV input.
The integrated MPPT controller supports a PV voltage range of 60V–450V DC, while the stated 180% DC/AC ratio allows significant solar PV oversizing relative to the 5kW AC inverter output.
This can provide greater solar-generation potential and help make better use of available solar resources, subject to proper system design, installation requirements, and manufacturer specifications.
Ultra-Fast <10ms UPS Switching
With a stated UPS transfer time of less than 10ms, the HeroEE MaxPower 8 AIO is designed to switch rapidly between grid power and backup power.
This feature can be particularly useful for applications where minimizing power interruption is important, including:
- Computers
- Wi-Fi and networking equipment
- Office equipment
- Compatible sensitive electronics
- Home communication equipment
Actual performance depends on the connected equipment and installation configuration.
All-in-One Energy Storage System
The HeroEE MaxPower 8 AIO simplifies energy-storage installation by integrating multiple components into one system:
Battery + Hybrid Inverter + MPPT + Smart BMS
Instead of requiring separate battery and inverter systems, this integrated architecture provides a compact and coordinated energy-storage solution.
It is designed for customers looking for a streamlined home solar battery, backup power system, or residential energy storage solution.
Expandable Up to 128kWh
The system can be expanded by connecting up to 16 units in parallel, providing up to approximately 128kWh of total nominal storage capacity, based on the supplied specifications.
This scalability can be useful for larger homes, offices, businesses, and energy-storage installations requiring more battery capacity.
Parallel installation and system expansion should always follow the manufacturer's technical requirements and professional installation guidelines.
Suitable for Homes and Businesses in Nepal
The HiTHIUM HeroEE MaxPower 8 AIO can be used as a home energy storage system in Nepal for customers looking for backup power and solar energy storage.
Potential applications include:
- Residential homes
- Offices
- Small businesses
- Solar-powered properties
- Home backup systems
- Load-shedding backup applications
- Refrigeration
- Lighting systems
- Computer and networking equipment
- Water pumping applications
- Properly sized air-conditioning loads
The actual backup duration depends on the connected electrical load, battery state of charge, solar generation, and overall system configuration.
Why Choose HiTHIUM HeroEE MaxPower 8 AIO?
The HeroEE MaxPower 8 AIO brings several important energy-storage functions into one integrated platform. Its combination of 8.038kWh LiFePO4 storage, 5kW pure sine wave AC output, up to 9kW solar input, built-in MPPT, <10ms UPS switching, and expandable storage makes it a versatile option for residential and commercial energy-storage applications.
For customers searching for an 8kWh solar battery in Nepal, 5kW inverter system, LiFePO4 home battery, solar backup system, or all-in-one energy storage system, the HeroEE MaxPower 8 AIO provides a powerful combination of battery storage and solar-energy management in a single unit.
Technical Specifications
| Specification | Details |
|---|
| Brand | HiTHIUM |
| Model | HeroEE MaxPower 8 AIO |
| Product Type | All-in-One Energy Storage System |
| Battery Chemistry | Grade-A LiFePO4 (LFP) |
| Cell Capacity | 314Ah |
| Configuration | 8S1P |
| Nominal Voltage | 25.6V |
| Battery Capacity | 8,038.4Wh / 8.038kWh |
| Continuous Output Power | 5,000W / 5kW |
| Inverter | Built-in Pure Sine Wave |
| Maximum Solar Input | 9,000W / 9kW |
| PV Voltage Range | 60V–450V DC |
| DC/AC Ratio | 180% |
| MPPT | Built-in |
| UPS Transfer Time | <10ms |
| Cycle Life | 11,000+ cycles |
| Parallel Expansion | Up to 16 units / 128kWh |
| Dimensions | 500 × 230 × 757 mm |
| Weight | Approx. 75kg |
| Warranty | Confirm with authorized seller |
Frequently Asked Questions
What is the HiTHIUM HeroEE MaxPower 8 AIO?
It is an all-in-one energy storage system combining a LiFePO4 battery, inverter, MPPT solar controller, and BMS in one integrated unit.
How much energy can it store?
The system has a nominal battery capacity of 8.038kWh (8,038.4Wh).
Is the HeroEE MaxPower 8 AIO a 5kW inverter?
Yes. It has a stated 5,000W continuous pure sine wave AC output.
How much solar power can it accept?
The system supports up to 9,000W of solar PV input, with a stated PV voltage range of 60V–450V DC.
Can it be used as a home backup battery in Nepal?
Yes. It is designed for residential energy storage and backup-power applications. Actual backup duration depends on the connected load and system configuration.
Is the battery LiFePO4?
Yes. The HeroEE MaxPower 8 AIO uses Grade-A LiFePO4 (LFP) 314Ah cells.
What is the battery cycle life?
The supplied specification states 11,000+ cycles.
Can the system be expanded?
Yes. The supplied specification supports up to 16 units in parallel, providing up to approximately 128kWh of total nominal storage.
Can it run an air conditioner or water pump?
It may be suitable depending on the appliance's running power, starting/surge requirements, and the total connected load. Professional system sizing is recommended.
What is the UPS transfer time?
The stated UPS switching time is less than 10ms.
Get HiTHIUM HeroEE MaxPower 8 AIO in Nepal
Looking for a HiTHIUM HeroEE MaxPower 8 AIO, 8kWh solar battery, 5kW inverter, or LiFePO4 home energy storage system in Nepal?
Contact the seller for current price, availability, installation requirements, solar compatibility, system sizing, and warranty confirmation before purchase.
HiTHIUM HeroEE MaxPower 8 AIO — integrated energy storage for reliable solar and backup-power applications.
